p99rs factory crossover points? - DIYMA Car Audio Forum

Reset the P99 by hitting the little reset button on the face under the tuning knob.
With the key on and headunit off press and hold the tuning knob until the menu appears.
scroll through the menu until you see the option to reset the audio. Reset and exit the menu.
Press and hold the tuning knob until the menu appears. Scroll through and set all your settings. Clock, Everscroll, Reverse...bla bla bla...turn off the ATT or adjust it to the lowest point. -10bd
Exit this settings menu
Turn on the headunit. Press and hold the volume knob until the menus are displayed. Scroll through the menus and stop on 'Audio' and select this submenu.
Now scroll through the menus until you find the crossovers and gains.
Begin tuning.
Set the desired crossover points and slopes. Exit this menu
Turn off the headunit but leave the key on.
Open the face by pressing the CD open button.
Connect the auto-tune mic.
When the menu appears to auto-tune scroll until you see 'Custom Network' and select this option.
Start the auto-tune.

When the auto-tune is completed you can still go back and select an EQ preset like #1 and make EQ adjustments.
You can still fine tune TA
You can still fine tune driver gains.

The auto-tune is a good starting point for the 'New To Fully Active Tuning' user.

Chuck

Source: http://www.diymobileaudio.com/forum/technical-advanced-car-audio-discussion/141679-p99rs-factory-crossover-points.html

joe pa joe pa joe paterno dead marist south carolina primary results betty white ed reed